§ 20‑183.4.  License required to perform safety inspection; qualifications for license.
(a)	License Required. – A safety inspection must be performed by one of the following methods:
(1)	At a station that has a safety inspection station license issued by the Division and by a mechanic who is employed by the station and has a safety inspection mechanic license issued by the Division.
(2)	At a place of business of a person who has a safety self‑inspector license issued by the Division and by an individual who has a safety inspection mechanic license issued by the Division.
(b)	Station Qualifications. – An applicant for a license as a safety inspection station must meet all of the following requirements:
(1)	Have a place of business that has adequate facilities, space, and equipment to conduct a safety inspection. A place of business designated in a station license that has been suspended or revoked cannot be the designated place for any other license applicant during the period of the suspension or revocation, unless the Division finds that operation of the place of business as an inspection station during this period by the license applicant would not defeat the purpose of the suspension or revocation because the license applicant has no connection with the person whose license was suspended or revoked or because of another reason. A finding made by the Division under this subdivision must be set out in a written statement that includes the finding and the reason for the finding.
(2)	Regularly employ at least one mechanic who has a safety inspection mechanic license.
(3)	Designate the individual who will be responsible for the day‑to‑day operation of the station. The individual designated must be of good character and have a reputation for honesty.
(4)	Have equipment and software approved by the Division to transfer information on safety inspections to the Division by electronic means. During the initial implementation of the electronic inspection process, the vendor selected by the Division shall provide the equipment and software at no cost to a station that holds a license on October 1, 2008.
(c)	Mechanic Qualifications. – An applicant for a license as a safety inspection mechanic must meet all of the following requirements:
(1)	Have successfully completed an eight‑hour course approved by the Division that teaches students about the safety equipment a motor vehicle is required to have to pass a safety inspection and how to conduct a safety inspection using equipment to electronically transmit the vehicle information and inspection results.
(2)	Have a drivers license.
(3)	Be of good character and have a reputation for honesty.
(d)	Self‑Inspector Qualifications. – An applicant for a license as a safety self‑inspector must meet all of the following requirements:
(1)	Operate a fleet of at least 10 vehicles that are subject to a safety inspection.
(2)	Regularly employ or contract with an individual who has a safety inspection mechanic license and who will perform a safety inspection on the vehicles that are part of the self‑inspector's fleet.  (1965, c. 734, s. 1; 1967, c. 692, s. 2; 1975, c. 716, s. 5; 1993 (Reg. Sess., 1994), c. 754, s. 1; 1997‑29, s. 1; 2007‑503, s. 3; 2008‑190, s. 2.)